Robust bottle holder for large 1.5 litre PET bottles, 1 litre, Nalgene wide-neck bottles and the large 1 litre insulated bottle from Stanley. MaterialPETGhttps://amzn.to/49De8GQ
Tag archives: camper van
Vertical holder for small fire extinguishers
Stable vertical mounting for a quick-grab small fire extinguisher (maximum diameter 110 mm) in the motorhome or caravan. A standing position is provided. The bracket is two-part to be as flexible as possible and adapt to the conditions in the motorhome. The fire extinguisher is inserted into the holder from above and holds there on …
Continue reading “Vertical holder for small fire extinguishers”
Window louvers for camper van
Our expedition vehicle based on a Mercedes-Benz Sprinter 4×4 leaves only a few options to ventilate properly from the factory. Due to the curvature of the vehicle’s sides, it immediately rains in when the sliding window is open, and the airstream pushes inward unpleasantly while driving. I have made suitable perforated plates and transparent window …
Magnetic clamp for curtains in camper van
Flexible magnetic clamp to attach curtains to the center pillars in the motorhome. The clamp consists of four parts with three joints. The attachment is made via strong neodymium magnets.Three M3 x 35 mm cylinder-head bolts and five M3 self-locking nuts are required for mounting. Two M3 x 16 mm countersunk head screws are used …
Continue reading “Magnetic clamp for curtains in camper van”
Paper towel holder with threaded rod for more stabilty
I first used the paper towel holder from user “kr15_uk” for my motorhome, but always had the problem that the roll unrolled by itself or fell off completely. I put a M8 threaded rod through the two round openings and designed two adapters for it. On the not so often used end a M8 nut …
Continue reading “Paper towel holder with threaded rod for more stabilty”
Bottle cage for camper
Introduction Simple, flexible but very stable holder for large 1.5 l bottles and Nalgene wide mouth bottles.The holder is deliberately designed in two parts to be able to freely choose the height so that top-heavy bottles do not fall out.The upper part of the holder is built particularly stable to prevent even on very bumpy …
Bracket for small fire extinguisher in camper van
Introduction Stable mounting for a quick-grab small fire extinguisher (maximum diameter 110 mm) in the motorhome or caravan. A lying position is provided.The bracket is three-part to be as flexible as possible and adapt to the conditions in the motorhome. The fire extinguisher is attached with a separate strap (maximum width of the strap 44 …
Continue reading “Bracket for small fire extinguisher in camper van”
Magnetic sponge tray for sink
Introduction Sponge tray that can be magnetically attached to the inside of the sink. In this way, residual water drips directly into the sink and, despite the holder, the full size of the sink is always available when needed.The tray is designed so that residual water can drain through several rounded drain holes. All internal …
Small under cabinet reading lamp for camper
Introduction Very compact and space-saving under-cabinet reading lamp for LED strips. I have designed the lamp so that the overall height is as low as possible (limited by the switch). The beam angle is chosen so that when mounted just above the head is pleasantly illuminated the book. Printing I recommend using heat-stable filament such …
Continue reading “Small under cabinet reading lamp for camper”
Tarp holder for rain gutter of a car
This is a bracket for attaching a tarp or awning to the rain gutter of a car or camper van. This model is specifically for the Mercedes-Benz Sprinter up to year of manufacture 2006, but should be universally applicable. The holder consists of two parts. A strip which is placed in the gutter and a …